Skip to content
Start My Route

How to start an ATM business

An ATM business places cash machines in stores, bars and other businesses and earns a surcharge on each withdrawal. To start one you need a machine, a processor, vault cash, a signed placement, and a check of your state's rules. The money is in the details: which transactions earn a surcharge, what the processor keeps, and how long your cash is tied up.

This guide comes from five years of running a small ATM route in eastern New Mexico and West Texas, a route that is now being sold. Example numbers below are rounded and made up.

1. Learn how the money works

Only surcharged withdrawals earn your surcharge. Balance inquiries, declined cards and surcharge-free withdrawals (some bank and network programs) do not. For one machine in a month:

  • Surcharged withdrawals x surcharge
  • minus processor fees (a fee per transaction, a monthly fee, or both)
  • minus location compensation (none, a flat monthly amount, or an amount per surcharged withdrawal)
  • minus wireless and repairs
  • plus interchange, if your processor shares it

Example only: 250 surcharged withdrawals at $3.00 is $750. A $0.20 processor fee on each is $50, a location paid $0.50 each gets $125, and wireless is $20, which leaves $555 before gas, insurance and your time. Try your own numbers in the ATM profit calculator.

2. Pick a processor before you pick a machine

Your processor connects the ATM to the networks and settles withdrawals to your bank. Processors differ in three ways that change your results:

  • How they are paid: a fee kept from each transaction, a monthly fee, or both.
  • What they pass to you: the full surcharge, or the surcharge less their fee.
  • When they pay out: with each settlement, or once a month.

Our route started with a processor that kept about $0.20 per transaction and paid out monthly, then switched to one that passed the full surcharge and paid out with each settlement. The fee savings were easy to see. The bigger change was that cash came back in days instead of weeks, so less money sat idle between loads. Ask any processor which machine models it supports, how long the contract runs, and what leaving early costs. Then read the agreement.

3. Plan your vault cash

Vault cash is the cash you load into the machine. It is float, not a cost: customers withdraw it, the processor settles it back to your account, and you load it again. You need enough for one load per machine, a buffer so it does not run dry, and whatever is still on its way back from the processor. Most new operators fund it with their own money.

4. Buy a machine your processor supports

New or used, the machine must read chip cards and be supported by your processor. A used ATM is only a bargain if its PIN pad and software are still accepted. Use an inspection checklist and get the keys, vault combination and passwords in writing.

5. Find a location and sign it

Good ATM locations have people who want cash: bars, flea markets, convenience stores without an ATM, and businesses with card minimums or cash discounts. Many placements start as handshake deals. Get them in writing anyway, with a term, renewal, compensation, removal and access terms, and an assignment clause so the agreement can move with the machine if you sell. See how to find and pitch locations.

6. Check your state's rules

ATMs are a banking matter, and rules vary a lot by state. New Mexico's Financial Institutions Division, for example, states that only New Mexico or federally chartered banks and credit unions can own or lease and operate an ATM there. Check with your state banking regulator and an attorney before you buy. Start with our state rules pages.

7. Run it like you will sell it

Even if you never sell, keep what a buyer will ask for: processor statements by machine, signed agreements that transfer, every recurring cost, and how long each location has hosted a machine. A common asking-price method is monthly net times a number of months, plus the machines. The ATM route valuation calculator shows the math.

Questions

How does an ATM business make money?

Mostly from the surcharge the cardholder pays on each withdrawal. Some processors also pass along part of the interchange. From that come processor fees, any payment to the location, wireless, repairs and your time.

Is vault cash a cost?

No. Vault cash is your money passing through the machine. It comes back to your bank account as the processor settles withdrawals. What it costs you is the money being tied up, plus interest if you borrowed it.

How much do I need to start an ATM business?

Enough for the machine, delivery and install, a wireless modem, business setup, and the vault cash to fill it. The vault cash is often the biggest number. Our ATM profit calculator estimates it from your volume, load schedule and payout timing.

Do I need a license to run ATMs?

It depends on the state. Some states regulate who can own or operate ATMs or require notice or registration. Check with your state banking regulator and read your processor agreement before you buy a machine.

Is the ATM business dying?

Fewer people carry cash than a decade ago, so location choice matters more than it used to. Bars, flea markets and businesses with card minimums or cash discounts still see demand. Test a location's volume before you count on it.